Technical specification/Assembly manual
STT60-S295 STT45-S293
9/14
Step
Description
Image
9
After assembly and
positioning the stands
their bases must be
fastened
to
the
ground
using
the
mounting holes of the
flat bars of the bases.
The omission of that
operation may cause
the stands overturn
and result in serious
accident or damages
.
It is recommended that hex nut head steel sleeve anchors dia. 12 mm and
length 100 mm (holes in concrete must be of dia. 12 mm and 100 – 120 mm
deep) are used for anchorage. The concrete layer is to be dry and non-cracked.
For the installation of the anchors please see their producer’s instruction.
Recommended concrete foundations are shown below:
[mm]
The stand bases situated in the foundations:
[mm]
