Technical specification/Assembly manual
STT60-S295 STT45-S293
10/14
IV. Operating and maintenance
To block/unlock the crank lever change its position by following the marks on the crank.
To avoid bases’ shifts during exploitation, block them using the base brake, turn the knob clockwise to block
the post shift and turn it counterclockwise to release the brake.
As the producer we have done our best to make pole vault stands guarantee maximum safety level, be easily
operated and reliable in use. However the stands like any other pieces of sports equipment requires periodical
inspections and must be used according to the instruction manual and operated by authorized personnel.
While operating the stands the following rules must be observed:
The base wheels should be only used to transport the stands on level surfaces and within short
distances. For long distances you must unscrew the posts from the bases.
While changing the height of the crossbar support or adjusting the distance of the post to “0” line make
sure to slow down before reaching extreme positions. That allows you to avoid “banging” which may
result in excessive load of the mechanisms.
During idle periods the posts of the stands, which are installed outside, must be unscrewed from the
bases, put on the landing area and the whole jumping facility (including the stand bases) must be
secured with garage.
If there is no garage available in the facility, only during summer athletics season the unscrewed posts
can be put on the landing area on the condition that the posts and the bases are protected against rain
with waterproof covers (not included).
When the summer athletics season ends the stands (including the bases) must be dismounted and
stored in a dry and roofed place.
