Polanik STT17-63F, Technical Specification, Assembly Manual

Page: 9 / 14

Technical specification/Assembly manual STT17-63F 9/14
Step Description Image
6 Fasten the crossbar
support using a hex key
no. 6.
7 Change the crank
lever’s position from
“transport position” to
“work position”:
unscrew a fastening
nut, rearrange the crank
lever, home the nut
using a metric wrench
no. 17.
transport position working position
8 Transport assembled
stands to the place of
use.
9 After assembly and
positioning the stands
their bases must be
fastened to the ground
using
the mounting
holes of the flat bars of
the bases.
The omission of
that operation may
cause the stands
overturn and result in
serious accident or
damages .
It is recommended that hex nut head steel sleeve anchors dia. 12 mm and
length 100 mm (holes in concrete must be of dia. 12 mm and 100 – 120 mm
deep) are used for anchorage. The concrete layer is to be dry and non-
cracked. For the installation of the anchors please see their producer’s
instruction.