Polanik STT17-63F, Technical Specification, Assembly Manual

Page: 2 / 14

Technical specification/Assembly manual STT17-63F 2/14
Thank you for choosing Polanik Club pole vault stands STT17-63F.
Safe assembly and use

Before you start to assemble and use the stand please read this manual carefully, watch the instruction film
about the Polanik Professional foldable stands, the folding mechanism of the Polanik Club foldable stands is
based on the same idea (scan the QR code to watch the film on the webpage):

Do not install or use the stands without a landing area.

The stand bases must be anchored to the ground.

During idle periods the posts of the stands which are installed outside must be folded and the whole jumping
facility must be secured with garage, or if there is no garage available the stands must dissembled and
stored in a dry roofed place.

The stands come with the electronic counters which are programmed and calibrated at our factory. The
counter is always on. The battery life is min. 5 years. The keypad is blocked to protect factory settings
against any accidental alternation. If the settings of the counter are erased please contact us before using
the stands.

The sports equipment produced by Polanik is designed for athletics training and use in sports competitions
only. Please pay special attention especially when using throwing implements and other throwing
equipment, misuse of athletics equipment and implements can cause serious injury or in extreme cases even
death. That is why training and use during sports events have to be always supervised by authorized sports
personnel. In no event shall Polanik be liable for any special, incidental, indirect or consequential damages in
connection with the purchase or use of POLANIK products or costs over the original cost of the product.

Unauthorized copying of this manual, in whole or in part, is prohibited.

The contents of this manual are subject to change without notice.

The producer reserves the right to introduce without warning changes in product constructions and colours.