OneSix Server Help
Overview
x
3
will delete a single device. Click on a device to select it and click on "Delete" to
delete it. To edit a device click on the device to select it and click on "Edit" to edit
the device. There is also a "Stop" button. If you click that button, OneSix will stop
listing devices in the window. When you click on the "Stop" button it becomes a
"Receive" button. If you click on that, OneSix will start receiving packets and listing
devices again.
When you are ready, hit "OK", or "Cancel" to exit.
Edit Device
The Edit screen for a new wireless device shows the device's serial number, which
the user cannot change, the device's current Label, which can be changed by the
user, and the Transmit Rate for the device. The Label cannot be the same as the label
used by any current device. The Transmit Rate is in seconds. The default value is
60. OneSix uses the Transmit Rate to determine if a device has gone offline.
Receivers
The following is a list of the receivers that OneSix can use:
x
Point View Receiver
x
Point Host Receiver
x
Point Integrator Logger –select "Point Host Receiver" from the "Select
Communication Port" screen
x
Point Repeater and Repeater III – select "Point Host Receiver" and set
the TZR baud rate to 19,2000.
x
TCP/IP Receiver (Point Manager in “Pass-Thru” mode)
