Poindus VariPOS 715S, User Manual

Page: 27 / 34

© Copyright Poindus Systems 2012 P27 / 34
Cash drawer bit define should be follow DIN0/DOUT0 for cash drawer 1 DIN1/DOUT1 for cash drawer 2:
Bit 0: Reserved
Bit 1: Reserved
Bit 2: Reserved
Bit 3: Cash Drawer “DIN0” pin output control.
= 1: the Cash drawer closed or no Cash Drawer
= 0: the Cash Drawer opened
Bit 4: Cash Drawer “DOUT0” pin output control.
= 1: opening the cash drawer
= 0: allow close the cash drawer
Bit 5: Cash Drawer “DIN1” pin output control.
= 1: the Cash drawer closed or no Cash Drawer
= 0: the Cash Drawer opened
Bit 6: Reserved
Bit 7: Cash Drawer “DOUT1” pin output control.
= 1: opening the cash drawer
= 0: allow close the cash drawer
Note: Please follow the cash drawer control signal to control the cash drawer
Cash Drawer Control Command Example
Use Debug.EXE program under DOS
Command Cash Drawer
O 482 10 Open cash drawer
O 482 00 Allow to close

Set the I/O address 482h bit4 =1 (opening cash drawer by “DOUT bit0” pin control)

Set the I/O address 482h bit4 =0 (allow to close cash drawer)
Command Cash Drawer
I 482 The status of cash drawer

The I/O address 482h bit3 =1 (Cash Drawer is opened or not exist)

The I/O address 482h bit3 =0 (Cash Drawer is closed)