52
9) Referring back to the Step 7) figure, click the
‘Advanced’ Tab. Disable ‘Internet Connection Firewall’
by un-checking the box.
10) Set the network configurations of MEDIAGATE T1.
Press [SETUP] on MEDIAGATE T1 remote control to
display the Setup screen. Select DHCP: Off and
enter the IP address & Subnet mask you want to use.
For example, you may enter:
IP Address: 192.168.001.002
Subnet mask: 255.255.255.0
After entering the IP Address and Subnet, press
[SETUP] again to save configurations.
ü
If you use Service Pack 2, refer to the following figures.
Click ‘Settings’ at ‘Windows Firewall’
ü
If you are connected to a DHCP Server or Router,
select ‘Obtain an IP address automatically’. You will be
given an automatic IP Address and Subnet Mask.
Check ‘Off’ and click ‘OK’
ü
You must connect MEDIAGATE T1 to a TV set for this
setup. See “3.1.1 Connect Video Cable”.
Summary of Contents for MediaGate T1
Page 1: ......
