poewit.com
INSTALLATION AND SETUP
2
• Note: The WAP-1 and the mobile device running the PoEWit
App must be on the same external IP address and the same
local subnet.
3) Once powered On, the WAP-1 will automatically connect to the
internet, and the Power LED will appear blue when the device is
ready for operation.
4) There are two installation scenarios depending on whether or not
there is a wireless network already installed.
4a) With an Existing AP on the Network:
1. Connect to the existing AP using your mobile device.
2. Open the PoEWit App to discover and configure the new WAP-1.
