Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(22) Channel B Display Mode (MDF-B) - MENU No.21
This function is used to set the display mode of channel B.
Display modes:
•
Frequency:
Fre channel No.
•
NAME:
Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Busy Channel Lock (Busy Lockout) - MENU No. 22
When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other radios,
when you press key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
(24) Auto Keypad Lock (Key Auto Lock) - MENU No.23
When this feature is activated, the keypad will be automatically locked after 15s; this prevents accidental pressure of any
keys.
The keypad lock can be manually activated/deactivated through the keypad: keep pressed [
*
] .
(25) Frequency offset direction (Direction) - MENU No.24
Using this function, you can set the direction of the frequency offset in rx and tx.
You have the following options:
•
Plus: Positive offset;
•
Minus: Negative offset;
•
None: No offset.
Note: you should set different frequency deviation according to the repeaters selected. This function is not enabled in
channel mode.
