a. In frequency or channel mode, Press
[CALL]
to turn on the radio.
b. Select the desired radio frequency with the
▲
or
▼
keys or input the frequency. or
•
Press [
* SCAN
] to automatically search a radio station.
c. Press [
CALL
] to exit FM radio.
Note: while you are listening to the radio, the frequency or channel of A / B receiving signal will automatically switch to
the frequency or channel mode for normal transmitting and receiving.
(For USA version, only 88-108MHz can be selected)
When the signal disappears the radio will automatically switch again to FM radio mode.
6.8 TX 1000Hz, 1450Hz, 1750Hz, 2100Hz repeaters tone
Press
[PTT] + [SK1]
to send 1750Hz repeaters tone. This function is useful for communications through repeaters.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to unlock
your radio.
6.9 Manual Programming (Channels Memory)
Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The POFUNG P10UV features 128 memory channels that each can hold: Receive and transmit frequencies, transmit power,
group signaling information, bandwidth, ANI/ PTT-ID settings and a six character alphanumeric identifier or channel name
1
.
Frequency Mode vs. Channel Mode
In standby mode, press and hold the [MENU] key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO) :
Used for a temporary frequency assignment, such as a test frequency or quick field programming if
permitted.
Channel Mode (MR) :
Used for selecting preprogrammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 10:
