Battery installation
1. Hold the battery lock clips on the sides of the battery.
2. Remove the battery carefully.
3. When installing the battery, make sure the red female connector of the battery is connected
to the male connector of the drone.
4. Replace the battery in the drone then push lightly until you hear the lock click.
Charging the battery
1. Connect the battery to the charger.
2. Connect the charger to a USB port or a USB adapter, the indicator light will come on to confirm that
the load of the drone is in progress.
3. The battery indicator light will turn off once the battery is fully charged. You can remove the
drums. Never leave the battery unattended for the duration of charging.
-4-
How to install and charge Battery
1. Make sure the voltage required for USB charging corresponds to the power source used.
2. The charger plug may overheat if overloaded. In this case disconnect the battery immediately to avoid an accident.
3. Do not let the battery charge unattended.
4. Do not use any charger or charging cable other than the one supplied with the drone.
5. Wait 30 minutes after a flight for the battery to cool before recharging.
6. Do not leave the battery in a fire, in the sun or in environments that are too hot.
7. Do not short-circuit the battery.
8. Keep the battery away from metal parts or magnets.
Loading precautions
Chargement de la batterie en
CAUTION !
Do not leave the battery
charging unattended.
Summary of Contents for R-Siyou HD
Page 16: ......
