PNJ DR-Wing HD, User Manual, Page: 9 / 24

-8-
Figure 1: Engine ignition
2m
2m
The drone rises 2m regardless
of its starting altitude.
Takeoff
Landing
Automatic take off and landing
1. Take-off: After the automatic take-off / landing button has been pressed for a long time, the drone rises and
stabilizes at an altitude of 2m above its starting position.
2. Landing: After the automatic take-off / landing button has been pressed for a long time, the drone will automatically
descend to the vertical position until it lands on the ground.
After turning on the engines (Figure 1) you can manually lift the drone by holding the left joystick up (Figure 2).
Caution :
1. Always place the drone on a flat surface before pressing the autostart button.
2. You can still maneuver the drone during the take-off and auto landing phases.
3. Too fast acceleration can cause air depression around the sensor and cause altitude losses.
4.
Manual Take off
Figure 2: Manual Takeoff
Emergency stop button
Figure 1: Emergency stop Figure 3: Resume the flight Figure 2: Vertical Crash
!
Warning
!
Emergency stop and vertical crash
1. Emergency stop: In the event of a collision or loss of control, you must immediately stop the drone's engines. To do
this, simultaneously press the two emergency stop buttons (Figure 1).
2. Vertical Crash: If the drone crashes in a vertical position it will automatically shut down its engines for safety
to protect the rotors and your environment from damage (Figure 2).
3. Resume the flight: After using the emergency stop function or having crashed into a vertical position, please check
the condition of the drone and then place it on a flat surface. To relaunch, simply press the automatic take-off / landing
button or simultaneously hold both joysticks down and out to unlock the engines.
(Figure 3).