PNI Summer P3, User Manual

Page: 8 / 12

6
EN
Control panel:
A. Ice cube size: S/M/L
B. No water indicator
C. Ice basket full indicator
D. Power indicator
E. Power button
F. Select button for ice cube size
Operating instructions
Unpacking the ice maker
Ÿ
Remove the exterior and interior packaging. Check that ice basket and ice scoop is
included. If any parts are missing, please contact our customer service.
Ÿ
Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and
clean it
Ÿ
Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface.
Maker sure that there is at least 4 inches of space between the back and sides of your
ice maker and the wall.
Ÿ
Allow one hour for the refrigerant fluid to settle before plugging ice maker in.
Ÿ
The appliance must be positioned so that the plug is accessible.
Power the ice maker
Attention!!! Improper use of the grounded plug can result in the risk of electrical shock. If
the power cord is damaged please call your customer service.
Ÿ
Plug your appliance into an exclusive, properly installed, grounded wall outlet. This
appliance requires a standard 220-240volt, 50Hz electrical outlet with ground.
Cleaning and maintaining the ice maker
Attention!! Please clean the inside of the ice maker before using it for the first time.
Ÿ
Take out the ice basket.
Ÿ
Clean the interior with warm water and a soft cloth.
Ÿ
Then use the water to rinse the inside parts, and drain out the water by unplugging the
drain cap on the side.
Ÿ
The outside of the ice maker should be cleaned regularly with a warm water.
Ÿ
Dry the interior and exterior with a soft cloth.
Ÿ
When the machine is not in use for a long time drain all water from water reservoir.