5
PRE-OPERATING INFORMATION
You can use the SENSORO TRAVELLER II/TRAVELLER II+
with your hands-free ear piece or amplified speakers by
connecting your ear piece or speakers to the auxiliary audio
jack of the unit. You must have an ear piece or speakers with
a 2.5mm (
1
/
10
˝) plug. If you have an ear piece or speakers
with different sized plug, use a 2.5mm adapter between the
plug and the jack. Please note that we do not provide ear
pieces, speakers, or 2.5mm adapters.
The SENSORO TRAVELLER II/TRAVELLER II+ is designed
to operate on two AA alkaline or lithium batteries. To ensure
maximum performance, we advise that you should not use
other battery types. You may use AA alkaline rechargeable
batteries. However, the resulting battery life will vary.
Do not leave the SENSORO TRAVELLER II/TRAVELLER II+
exposed to extreme heat like strong sunlight. It can damage
the unit and battery.
Battery installation
1. Remove the battery compartment door at the bottom of
the unit when the unit is powered off.
2. Remove any old batteries (both batteries must be replaced
at the same time.).
3. Press down two fresh AA alkaline or lithium batteries into
place, observing the polarity indication inside the battery
compartment.
4. Replace the battery compartment door.
5. Turn the unit on to verify correct battery installation.
