9
Windshield mounting
1. Install the suction cups and bumper onto the windshield
mounting bracket by sliding them into their holes (if not
pre-installed).
2. Press the bracket base firmly against the windshield until
the suction cups securely take hold.
3. Slide the unit up to the bracket until the bracket arms
click into the slots on both sides of the unit.
Dashboard
Windshield
4. Bend the angle of the windshield mounting bracket, if
necessary, to adjust for best viewing and detection angle.
5. When you want to connect power from your vehicle, plug
the small connector of the power cord into the 12-volt DC
power input jack located on the side of the detector.
6. Plug the large adapter of the power cord into the lighter
socket of your vehicle.
INSTALLING THE UNIT
