
24
FM Operation
Repeat the above operation to turn the FM radio finction off.
FM function can be disabled fom PC software.
Long press [FM / Monitor / FM+] for more than 2 seconds until you hear a sound. Now the FM fucntion in ON.
Choose the FM channels by pressing [FM/Monitor/FM+] or [FM/Monitor/FM-].
When active the scan function by PC software and turn to channel 16, then the radio tips the sound of
“scanning”. If report “16” , it means the scan function is turned off.
Long press the red button for more than 2 seconds. The radio will transmit an emergency tone to all the
radios in the same frequency (channel 1). Press [PTT] to exit emergency call mode. Rotate the channel
selector button in order to change the channel.
Emergency Call
Scan function
When match with same signal, LED light would flash green and receive signals .Then you can transmit the
information by pressing PTT. If there is no operation on the radio, it would return to scan .
Example: When scanning is active for channel 3,5,7, the radio would scan automatically when get to
Channel 16 .Once receiving the signal from anyone of channel 3,5,7,16 , the scanning would stop and the
radio will be ready for transmitting.
If the scan function is active, the radio will scan the signal one by one from the present channel.
Summary of Contents for PMR R16
Page 14: ...13 CODURI CTCSS SI DCS DISPONIBILE PRIN PROGRAMARE PE PC...
Page 29: ...28 AVAILABLE CTCSS AND DCS CODES 50 CTCSS groups 83 DCS groups...
Page 31: ...30...
Page 32: ...31...