
23
FUNCTIONS AND OPERATIONS DESCRIPTION:
Turn On
Turn on the radio by rotating [Volume / Vox / On-Off] button clockwise. If you hear a “Di”, it means the radio
is turned on. Immediately you will hear a voice indicating the channel number.
Push [PTT] button. The LED will turn red. Release the PTT button when you have finished transmitting.
Press [PTT] and [FM / Monitor / FM+] in the same time. Release the two buttons to stop calling.
Call function
Squelch function
Switch [Channel] button until you reach the desired channel. A voice will indicate you the channel number.
Transmitting
Vox function
Monitor
Monitor function allows the temporarily disabling the Squelch in order to receive extremely weak signals.
Short press the [FM / Monitor / FM+] key to disable Squelch function. Press again to enable this function.
Activate VOX function from the PC software. The VOX level can be set between 1 and 10. Higher the set
level, higher will be the VOX sensitivity. Connect a wired earphone and start transmitting.
This function removes the background noise and allows receiving signal with low intensity. The squelch
level can be set between 1 and 9. The squelch level can affect the communication range. The squelch level
can be set through PC software..
This functions allows you to communicate withour pressing the PTT button.
Channel switch
Summary of Contents for PMR R16
Page 14: ...13 CODURI CTCSS SI DCS DISPONIBILE PRIN PROGRAMARE PE PC...
Page 29: ...28 AVAILABLE CTCSS AND DCS CODES 50 CTCSS groups 83 DCS groups...
Page 31: ...30...
Page 32: ...31...