10
FAQ & Troubleshooting:
a) The clock can display in either 12 or 24-hour display format
The
(
PM )
icon will show in the afternoon under the 12-hour display mode
b) The feeding-days can be changed at any time but the previous schedule will be
replaced and will start from the 1
st
new feeding day set
c) The feeding-times and feeding-volume can be changed at any time and the new
settings will be for the rest of the feeding day/s schedule
d) Once the schedule has started, the
DAYS
displayed will be reduced by 1 every day
at 0:00 (midnight) until the end is reached. It will then revert back to the original
number of set
DAYS
and the Feed Alarm will sound. Just press the
START
key to
start your original program/settings again
e) If the timer-icon is
OFF
and all numbers are flashing then no feeding schedule has
been set
f) When the timer icon is
ON
and all numbers on the LCD display are not flashing
then the schedule has started
g) When the Clock icon is
ON
the current time is displayed
h) When the
Red (LOW BATT) light FLASHES
,
the batteries are low and must be
replaced
Change all the batteries as soon as possible. You will have to reprogram all your settings again
when the batteries are changed
i)
When the LCD display shows
( Err )
, the food delivery door is not closing properly.
You
need to remove any food
that jams the door.
1)
Switch OFF the Auto Feeder, remove all food, turn your Auto Feeder upside
down
2)
Clean both doors hinges with a soft brush
3)
After cleaning switch ON the Auto Feeder and refill with food
Note: You will have to reprogram all your original settings before you can use
your feeder again
j)
Always use the Quick Setup Guide for fast easy programming. If you want more
advanced features, use the this Instruction Manual
