4
General Operation
1)
To review the settings
2) Press the
TIMER
key to cycle through and view the feeding times.
Only the feeding times per day that are set will be displayed. Digit-1 is the
feeding number each day, Digit-3 & 4 are the feeding times (in hours). Example:
(1 07)=(1st feeding at 7am)
3) Press the
VOL
key once to view the volume/portion-size and feeding day(s)
remaining
4) Press the
DAY
key to display feeding day(s) remaining
5)
Press the
CLOCK
key once to display the current time, the CLOCK icon will
now turn ON
6)
If no key is pressed for more than 8 seconds, the display will switch back to
show the next feeding time
with the timer icon flashing.
Note:
a) Using the
TIMER
key to cycle through the feeding times will only display to
the number of feedings you set. The sequence will repeat after the last one is
displayed.
b) Only the 1
st
feeding time will be displayed if you’ve set just 1 feeding
c) A flashing timer-icon means the feeding-time has not been reached while a
solid timer icon means the feeding-time has already passed
d) The volume and day display shares the same screen so Digit-1 & 2 are the
feeding day(s) remaining while Digit-4 is the Volume/Portion-size
4) Setting the Current Clock Time
1) Press the
CLOCK
key to display the clock
The time and clock icon will now be displayed
2) Press and hold (for 2 seconds) the
SET
key until all digits blink
Control
Panel
LCD
Display
PM
icon
TIMER
CLOCK
Digit-1 Digit-2 Digit-3
Di it 4
