5
To use this function proceed as follows:
The product has a set of
Smart cable , with auto diagnosis and status LED and sound:
- remove the silicon cover to find the 12V output
for
car jump start function
- insert the other end of the cable in the car jump
start 12V output of the power bank
. Led's flicker.
- connect the cable clamps to the vehicle battery
paying attention to the polarity
(red to "+", black to
"-")
Solid Green light and one short beep for
correct connection. Solid Red light and one
beep / second for failure status.
- turn on the power bank
- try starting the engine; if it doesn't work from the
first try, wait
30
seconds then try again
. Solid Red
Led after start and 4 beeps / second for succes
start.
- after starting the engine remove the cable from
car and
power bank
.
-
If engine does not start, check if it needs more
current than JS10 A can offer.
Other warnings:
- Short circuit: Solid Red LED and Beeping
frequency at 4 times/s
- Reverse connection: Solid Red LED and 2 short
beep and 1 longer beep in turn
- Low-voltage: Solid Red LED and Beeping
frequecy at 1 time/s
