PNI House PTZ1200 User Manual Download Page 15

15

DDNS

Enable

 check to enable this option

DDNS

: represents the dynamic domain name of the server.

Domain name

: enter the domain name registered by DDNS.

User name

: enter the user name registered by DDNS.

Password

: enter the user password registered by DDNS.

When DDNS is successfully configured and turned on, you can enter the domain name in the 

Internet Explorer browser to access it.

Note: DNS settings must be completed correctly.

FTP setup 

FTP becomes active only when the alarm becomes active or when the alarm makes a screen 

capture that it sends later through the FTP server.

Enable

 check to enable this option

IP server

: IP address of the FTP server

Port

: FTP domain port; the default is 21

User name

: FTP user name

Password

: the user password

Anonymous

: Activates anonymous mode - no need to set your username and password

Max file length

: maximum length of files to be archived. The default is 1024MB

Dir name

: the directory where the file is going to be uploaded

Note: The user must have the authority to upload files.

Summary of Contents for House PTZ1200




























Reviews: