EN
4
User manual
3. Measure and mark the vertical alignment of the sensors according to the
diagram below and make sure they are at a distance of 50-70 cm from
the ground (ideally 55 cm)
4. Measure and mark the horizontal alignment of the sensors. The external
sensors must be at a distance of 15 - 20 cm from the edge of the bumper.
5. Identify the center of the bumper, measure and mark the positioning of the
internal sensors. They must be at a distance of 25 - 40 cm from external
sensors.
Notes:
•
Try to find on the bumper a plain surface for mounting the sensors.
•
Sensors A, B, C and D should be mounted in this order from left to right, A
being the first sensor to the left, and D tthe first o the right.
(ideal 55cm)
center line
A
B
C
D
6. Before making holes into the bumper for installing the sensors, check that
the area below provides safety. Attach the cutter included in the box to a
drill and make holes in the previously marked places.
