29
Automatic squelch
Your PMR is fitted with automatic squelch circuitry which
filters out weak transmissions and unwanted extraneous
noise. These signals may be picked up as background
static and are usually caused by the nature of the terrain
or the fact that your radio is at the limit of its range.
Monitor
With this function, you can switch off the automatic
squelch feature, temporarily or permanently. In this way,
the maximum possible range of your radio can be used,
but it may pick up static signals as well. You can adjust
the speaker volume by the noise of the static.
Temporary monitor feature activation:
• Press and hold the
MON
button for up to four
seconds. The monitor signals will appear in the LC
display.
• Release the button to restore the automatic squelch
function.
Permanent monitor feature activation:
• Press and hold the
MON
button for up to five seconds
until you hear a bleep tone, then release it. The moni-
tor signals will appear in the LC display.
• To restore automatic squelch, press and release the
MON
button again.
Note: You cannot transmit when the monitor feature
is activated.
Other features
054305 Walkie-Talkie 07.06.2005 9:35 Uhr Seite 29
