21
Installing the batteries
To use the radio, install four AAA batteries.
Caution: Incorrect positioning of the batteries can dam-
age both the batteries and the unit.
To install the batteries:
Remove the belt clip. To do this, pull back the tab on the
top of the clip, raise the cover and pull off.
Pull the battery compartment lock downwards and
release the battery cover.
Insert four AAA batteries. Position the batteries accord-
ing to the polarity markings on the plastic.
Replace the battery cover. Snap the lock tab and belt clip
back into place.
Connecting the adapter
Lift the rubber flap on the top of the unit to expose the
jack. To operate the unit on
AC/DC, a suitable adapter is required (option) to charge
rechargeable batteries.
Insert the round connector (OD 2.5 mm) of the 7.5 V
DC/200 mA AC/DC adapter* into the
speaker/microphone/charging jack on top of the unit.
Note
The unit should be switched off in order to charge the
batteries properly. If the unit is left switched on the
charge current will be too low to charge the batteries, as
the unit will still be using power. There is no charge
indicator during charging in the off mode. It takes 7-10
hours to fully charge the batteries if they are at their
lowest level.
Starting to use your PMR radio
054305 Walkie-Talkie 07.06.2005 9:35 Uhr Seite 21
