MAN-70009, REV A
Page
19
of
35
4.7 FRONT PANEL STATUS INDICATORS
INDICATOR
FUNCTION
Fault
The Fault will be indicated when the main Power Supplie deviate from the
design parameters. The Amplifier will revert to RF OFF mode. When
either a Thermal condition occurs outside design parameters. Should an
excessive temperature condition occur while monitoring the SOLID
STATE temperature of the Heat sink temperature the Amplifier will revert
to RF OFF mode. Also when an RF module failed. The TFT Display will
indicate which fault had occurred.
Total/RFON HOUR
Elapsed time Indication on the TFT display, presents total hours that
the amplifier total or RF-ON has been energized.
Remote
The Remote will be indicated when the amplifier is in the remote control
mode of operation via the computer.
4.7.1 CONTROLS
CONTROL
FUNCTION
Power ON / OFF
Circuit Breaker to turn On/Off main prime power to the Amplifier.
Local
The Local switch is a momentary switch. When
depressed, the amplifier is restored to the local control from the
Remote
mode
of
control.
RF OFF / RF ON
Switch, when set to RF ON mode it will apply DC Voltage to the RF
Modules, when set to RF OFF it turn RF Modules OFF.
RESET
Switch, when pressed resets Faults.
