18 PMI Piranha
™
WARNING
DO NOT ATTEMPT TO PERFORM MAINTENANCE PROCEDURES UNLESS QUALIFIED TO DO SO.
CONTACT PMI, INC., FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED PMI PIRANHA™
REPAIR FACILITIES.
PAINTBALL MARKER POWER SYSTEMS MUST BE REPAIRED OR REPLACED ONLY WITH THE CORRECT
PRESSURE RATED COMPONENTS.
1. Before disassembly of the marker, remove all paintballs from the marker, barrel, and loader; remove power source;
and remove all gas or air from the power system.
2. To remove the bottom line air system (if needed), detach the bottom line ASA from the grip by removing the two
screws. Figure 27. Then unscrew the threaded connector from the vertical ASA adapter. Figure 28
3. To remove trigger frame from the receiver, remove the two large
allen screws under the receiver. One is in front of the trigger guard and
one is behind the grip portion of the frame. Figure 29.
The receiver then will disassemble from the
trigger frame.
ADVANCED MAINTENANCE PROCEDURES
Figure 27
Figure 28
Figure 29
Bottom
line ASA
Grip
Vertical ASA Adapter
Threaded Connector
Large
Allen Screw
Large
Allen Screw
