background image

PMI Piranha

1

PMI PIRANHA™ OWNER’S MANUAL

WARNING

This paintball marker is intended for sale to adults only, for use in compliance with all applicable laws and regulations.
Adult supervision is recommended at all times whenever a minor is handling this paintball marker. Protective goggles and
headgear specifically designed for paintball must be worn by all persons within range when a paintball marker is in use.
Paintball safety rules must be followed at all times.

WARNING

THE PMI PIRANHA™ PAINTBALL MARKER IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY
OR DEATH. EYE PROTECTION DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND
ANY PERSON WITHIN RANGE. READ THIS OWNER’S MANUAL COMPLETELY BEFORE LOADING,
PRESSURIZING, OR OPERATING THE  PMI PIRANHA™ PAINTBALL MARKER.

TABLE OF CONTENTS

PAINTBALL SAFETY RULES .........................2
OPERATING INSTRUCTIONS..........4
COMPRESSED GAS/AIR..........6
VELOCITY ADJUSTMENT ....................8
PMI PIRANHA™ SPECIFICATIONS ..............10
PARTS & DIAGRAM  ....................................11
MAINTENANCE & LUBRICATION ............14
TROUBLESHOOTING ........................20
WARRANTY........23

This owner’s manual is provided with several models of the PMI Piranha™ paintball marker. Pursuit Marketing, Inc. 
(PMI, Inc.), reserves the right to modify or change its markers without incurring any obligation to incorporate such 
modifications or changes in any of its products that were sold prior to the modification. The information in this owner’s
manual may be updated or changed without notice. 

This owner’s manual is intended to remain with the paintball marker upon any subsequent transfer of the marker, whether
through sale, resale, or furnishing in any manner. Updated and replacement owner’s manual may be obtained from 
Pursuit Marketing, Inc., 5035 River Road, Schiller Park, IL 60176 USA; phone 847.233.9900; www.pminetwork.com.
Questions about the operation of the PMI Piranha™ paintball marker may be directed to Pursuit Marketing, Inc.

Summary of Contents for Piranha VTL

























Reviews: