Safety Information
••••
2
•
Remove all test leads that are not in use. The maximum
permissible input voltage is 600V between banana jack inputs
(channel-channel, or channel to common).
•
Use only one connection to the COM banana jack on the
Eagle housing.
•
Do not connect the USB cable to the Eagle’s communication
port while the unit is powered from the voltage input jacks, as
the USB cable is not rated for 600V CAT III installation.
Safety Issues
Please read this safety information carefully before installing or
using the Eagle. The interior of the recorder contains dangerous
voltage levels during operation. TO AVOID ELECTRIC SHOCK
AND TO PRESERVE THE ENVIRONMENTAL INTEGRITY OF
THE HOUSING, do not attempt to remove the sealed lid or
otherwise disassemble the unit. THERE ARE NO USER-
SERVICEABLE PARTS INSIDE THE RECORDER.
This device is manufactured for use by trained and qualified
personnel only. Do not install or operate while in contact with
standing water or wet ground. Wear protective gloves and safety
glasses at all times during installation, operation, and removal of
the recorder. Where possible during installation, disconnect
power from any lines to which the recorder will be attached.
PMI flexible CTs and True Low-Ampere Reading (TLAR) CTs
available for use with the Eagle are manufactured with 600V rated
integral cables, preventing accidental disconnection. Although the
recorder has been designed and built to be as safe as possible,
great care should be exercised at all times during operation and
installation.
