2 SAFETY ISSUES
2
Safety Issues
Please read before installing the 2SX-Series Scanner.
The 2SX-Series Scanner Voltage contains dangerous voltage levels during
operation. Do not disassemble the Scanner.
THERE ARE NO USER
SERVICEABLE PARTS INSIDE
.
Do not install or operate near open bodies of water.
The 2SX-Series Scanner is intended for use with a standard 2S meterbase, with an
appropriate revenue meter plugged into it.
Wear protective gloves and safety glasses at all times during installation and
operation of the Voltage Scanner.
If possible, disconnect power during installation.
If the green ground clip is damaged or detached, call PMI for a replacement.
Do not install the 2SX-Series Scanner if the ground clip cannot be attached to earth
ground.
When removing an installed Scanner, always completely remove the revenue meter
before attempting to remove the Scanner from the meter socket.
The RJ-11 serial port is optically isolated from the 120VAC line. However, to
insure user safety and prevent damage to the unit, only the supplied 2SX-Series
Scanner serial cable should be plugged into this jack. The other end of the serial
cable should only be plugged into an RS-232 serial port.
The 2SX-Series Scanner contains a lithium battery. This battery is not user
replaceable. If the battery ride-through option is present, the Scanner also
contains a nickel metal-hydride battery. This battery is not user replaceable.
Follow all applicable regulations concerning disposal of batteries if the 2SX-Series
Scanner is discarded, or return the unit to the factory for disposal.
Although the 2SX-Series Scanner Voltage has been designed and built to be as safe
as possible, great care should be exercised at all times during operation and
installation. The National Electric Code should be followed at all times.
