7
START UP
1. Relieve fluid pressure in
the gun (See Gun Manual
for proper procedure)
2. If necessary, relieve air
pressure in the tank by
pulling
up
on
the
Pressure Relief Valve
.
3. Ensure
ALL Valves
are in
the closed position.
4. Open the lid and fill tank
2/3 full with compatible
solvent.
5. Close and secure the lid.
6. Connect the air supply
(130 psi MAX) to the flush
tank and slowly open the
Inlet Valve
. After a few
seconds,
check
the
Pressure
Gauge
to
ensure the pressure has
stabilized.
7. Close the
Inlet Valve
, and
then disconnect the air
supply.
