MultiSmart
®
Arm/ENG/USA/CAN/10/16
11.
If you have purchased a halogen lamp cartridge (HL-20/24-XXX), please continue to follow the step by step instructions.
13.
Screw the switch assembly(
A
) to the hood with the supplied nut
and bolt(
B
). Push the plug that is attached to the lamp
cartridge(
C
), from the inside of the hood through the
rectangular hole.Fit light cartridge(
D
) inside of hood. Connect the plug
from the switch assembly to the plug from the light cartridge. Excess of
cable between switch assembly and light cartridge can be stuffed
back into the switch assembly housing.
12.
Remove the mesh(
A
) from inside of the hood. The most
efficient way to do this is to grab the mesh with a set of pliers
and pull it straight out. Also remove the sticker covering the
accessory holes on the hood(
B
).
A
B
A
B
C
D
14.
Secure the power supply cable to the arm using two of the supplied
plastic fasteners(
A
). While doing this make sure that the length of cable
between the tube and hood(
B
) is long enough not to obstruct the movement of the
hood. Attach the rest of the cable to the arm with the remaining plastic fasteners
and the self adhesive anchors .
You have now completed the installation of the
halogen lamp kit.
A
B
