0507271010/Flex 2/281103/B
EN - 6
1
PREFACE
Using this manual
This manual is intended to be used as a work of
reference to be able to safely install, use, maintain and
repair the product mentioned on the cover of this
document.
Pictograms and symbols
The following pictograms are used in this manual:
!
!
.
Suggestions and recommendations to simplify
carrying out tasks and actions.
!
.
!
.
CAUTION!
Procedures, if not carried out with the
necessary caution could damage the product,
the workshop or the environment.
!
.
WARNING
Procedures, if not carried out with the
necessary caution may damage the product or
cause serious personal injury.
j
j
j
j
.
WARNING
Fire hazard! Never use the product for
extracting inflammable, glowing or burning
particles or solid liquids. Never use the product
for extracting aggressive fumes (such as
hydrochloric acid).
Related documentation
The following related documents are available:
- 0507434040/NMB-TNB
- 0507310010/NEC
- 0507230010/WL+AST
- 0507360010/NCW 4-11
Service and technical support
For information about specific adjustments,
maintenance or repair jobs which are not dealt with in
this manual, please contact the supplier of the product.
He will always be willing to help you. Make sure you
have the following specifications at hand:
- product name
- serial number
These data can be found on the identification plate.
2
SAFETY INSTRUCTIONS AND
WARNINGS
General
The manufacturer does not accept any liability for
damage to the product or personal injury caused by
non-observance of the safety instructions in this
manual, or by negligence during installation, use,
maintenance and repair of the product mentioned on
the cover of this document and any corresponding
accessories.
Specific working conditions or used accessories may
require additional safety instructions. Immediately
contact your supplier if you detect a potential danger
when using the product.
The user of the product is always fully
responsible for observing the local safety
instructions and regulations. Observe all
applicable safety instructions and regulations.
User manual
• Everyone working on or with the product, must be
familiar with the contents of this manual and must
strictly observe the instructions therein. The
management should instruct the personnel in
accordance with the manual and observe all
instructions and directions given.
• Never change the order of the steps to perform.
• Always keep the manual with the product.
Intended use
1
The product has been designed exclusively for
extracting harmful fumes and gasses which are
released during the most common welding processes.
Using the product for other purposes is considered
contrary to its intended use. The manufacturer accepts
no liability for any damage or injury resulting from such
use.
The product has been built in accordance with state-of-
the-art standards and recognised safety regulations.
Only use the product in technically perfect condition
with its intended use and the instructions laid down in
the user manual.
Modifications
• Modification of (parts of) the product is not
allowed.
1. "Intended use" as laid down in EN-292-1 is the use for which the
technical product is suited as specified by the manufacturer,
inclusive of his directions in the sales brochure. In case of doubt it
is the use which can be deducted from the construction, the model
and the function of the technical product which is considered
normal use. Operating the machine within the limits of its intended
use also involves observing the instructions in the user manual.
