130519/A ControlPro | Short user manual
EN - 25
5.2.1 Counters
Reset all cleaning cycles to 0 (zero):
• Select the button
Reset cleaning cycle counters
.
The following cycles are reset:
-
Number of cleaning cycles (total)
- Cleaning cycles online
-
Cleaning cycles offline
5.2.2 Logs
The two buttons at the bottom of the
Logs and counters
window open logs, respectively
for Alarms and Warnings and for Filter replacement.
5.2.3 Export overall event log
The button
Export
will write a complete set of event logs and counter data as a file to a
USB stick.
• Connect a USB stick
15
to the Panel
16
.
• By default
Add serial number to filename
is selected, multiple Export logs and
counters data files on the same USB stick are possible.
• Select
OK
to start exporting the data.
15 Refer to section 6.5 for the USB stick requirements
16 The USB connector is located inside the Panel.
Future development is to connect the USB to the HMI.
When the export log is created, the message
export log ... done
appears.
• Remove the USB stick from the ControlPro/Panel.
