4. Configuring specific apps
OBD Auto
Doctor
1. Select ‘Extras’ (bottom right corner of the screen)
2. Under Settings select ‘Connectivity’
3. Select the
WiFi
option
The IP address should be 192.168.0.10 the port 35000
4. Select
Status
(bottom left corner of the screen)
5. Select the Connect (Chainlink icon in the top right corner of the
screen)
OBD Auto Doctor should now be connected and reading
parameters from your car.
Harry's
LapTimer
Rookie /
Petrolhead /
Grand Prix
Harry’s should automatically connect after 10–15 seconds. If
Harry’s does not automatically connect:
1. Select
Administration
>
Settings
>
Expert Settings
2. Make sure that
Use Wi-Fi Sensors
is turned on
3. Select
< Settings
then
< Administration
and select
Sensor List
4. KiwiWifi OBD should be a listed sensor.
If still experiencing problems skip to the troubleshooting section
OBD Car
Doctor
OBD Car Doctor is currently not compatible with Kiwi 2+ for
iPhone. Updates coming soon.
DashCommand DashCommand should automatically connect. Follow the Kiwi 2+
will not connect troubleshooting steps
.