Plustek VS 210A Getting Started Manual Download Page 2

Page: 2 / 8

Connect Audio In/Out

For audio functionality, connect the audio input cable.

Information

Video flicker may occur when enabling/disenabling audio. This
situation normally only lasts for a second.

Power on IP Camera

Connect the power adapter to the power connector. The adapter should be
connected to 110V~220V AC socket. There is no power button on the camera,

connecting/disconnecting the power adapter will start/shutdown the IP camera.

Initial Network Configuration

To configure the IP camera’s network settings use the IP Scan utility Factory IP
Address.

Below are the initial factory IP address settings for the IP camera:

IP Address

192.168.1.2

Subnet Mask

255.255.255.0

Gateway 192.168.1.1

Summary of Contents for VS 210A

Page 3: ...on the IPScan exe icon in the Installation CD to execute IP Scan utility Press the Scan button to list the IP and MAC address list for IP cameras on the network A new IP camera will display the factory IP address 192 168 1 2 However if multiple new devices are present on the network then multiple instances of 192 168 1 2 will be listed 3 ...

Page 4: ... is located on the bottom of the camera Change Network Setting via IP Scan There are two ways to modify the network settings 1 Double click on a specific IP address the setting page will be displayed 2 Click Change Setting button at the bottom of the screen 4 ...

Page 7: ... ActiveX controls for the viewer to work Near the top of the browser page is a message regarding an add on to run The request is highlighted below in blue Clicking on the add on message will bring up options choose Install This Add on for All Users on This Computer to add A Security Warning message box will be displayed click OK 7 ...

Page 8: ... and the page to attempt reloading Most likely other ActiveX controls will be required Repeat the above procedure of adding ActiveX controls until no other add on requests are displayed and the Live View page appears without error 8 ...