Plustek PT2160 User Manual Download Page 12

Page: 12 / 59

LED I

NDICATOR

UNCTION

UMBER

ISPLAY

The Power LED indicates different scanner status.

Status

Power

LED Light

Function

Number

Display

Description

Power On

Blue On

The scanner is turned on, ready to
scan images.

Power Off

Off Off

The scanner is off, either because
the power is not turned on, or
because the AC adapter is not
properly plugged into an AC power
outlet.

Cover

Open

Blinking

Orange

The ADF cover is opened.

Power

Save

Orange Off

The scanner is in standby mode.
Simply press any scanner button on
the scanner panel and the scanner
will return back to the normal status.

ADF missing feed.

The paper or objects exceeds the
scanning position. Open the scanner
cover to remove paper or objects
and then close the scanner cover to
reload the paper.

E2L

Paper jam after scanning. Could
cause by the paper length exceeding
the preset size.

Operation

Error

Blinking

Orange

Paper multi-feed detected by
ultrasonic sensors.
*Ultrasonic paper-feeding detection
function is enabled.

Summary of Contents for PT2160




























































Search results

Summary of Contents for PT2160

Reviews:

Plustek PT2160, User Manual, Page: 12 / 59

Search results

Summary of Contents for PT2160

Reviews: