5. Load one page of the document and click the
Preview
button. The scanned
image should appear in the Preview Window. To define the margins and crop
out sections of the image you don’t want scanned, use the mouse to click and
drag the corners or sides of the scan area borders. Adjust the scan settings
again if the preview image doesn’t satisfy your needs.
6. Load all pages of the document and click the
Scan
button.
7. The scanned images are displayed in Readiris workspace, and you may
proceed OCR to convert images into pdf or editable text formats.
Click the
Help
button within the TWAIN window for more information about the
settings.
Scan within HotCard BizCard Finder:
1. Click on the Windows Start button, point to
All Programs
>
Business card
Recognition Software
and then click
Business card Recognition Software
to launch the Business card Recognition Software.
Attention
If you have more than one scanner or other
imaging devices installed on your computer, you
need to set this scanner as the default scanning
source before you acquire the TWAIN program.
1. From the Main Toolbar, click
Settings
>
Acquire Options
>
Flatbed/TWAIN Scan
,
and then click
Settings
>
Acquire
Options
>
Select Flatbed/TWAIN Scanner
.
2. In the window that opens, choose this
scanner and then click the
OK
button to set
this scanner as the default scanning source.
2. Within Business card Recognition Software, click
Scan
from the main
toolbar.
3. In the TWAIN window that opens, select
ADF
(Front Side)
as the Scan Type if
you want to scan single-sided business cards, or
select
ADF (Duplex)
to scan
double-sided business cards.
4. Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300).
For
ADF (Duplex)
scan, you can tailor settings individually for front and rear
sides of the business cards. Click
Front Side
button to adjust the scanning
settings of front side and then click
Rear
Side
button to adjust the scanning
settings of rear side.
You can enable the function of
Merge Pages
only when you select
ADF
(Duplex)
as
Scan type
and
Automatic Size
as
Page Size
to output the scan
images of both front and rear sides in one image. After the function of
Merge
Pages
is enabled, you can make the selection of
Horizontally
to generate both
front and rear image data horizontally in a joined image (the rear image will be
placed at the right side next to the front image), or
make the selection of
Vertically
to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
25
