Attention
If you have more than one scanner or other
imaging devices installed on your computer, you
need to set this scanner as the default scanning
source before you acquire the TWAIN program.
1. In Readiris Pro 10 Corporate Edition, click
the
Scanner
button located on
the left side.
2. Click
Scanner Model
. In the
Scanner
model
window that opens, select
Show
TWAIN User Interface
and then click the
OK
button.
3. In the next window that pops up, click the
Configure
button.
4. In the Select Source window that opens,
choose this scanner and then click the
Select
button to set this scanner as the
default scanning source.
5. If you want to scan from ADF, tick the box
of
ADF
on the right of the following window.
6. Click the
OK
button to return to Readiris
workspace.
2. Within Readiris Pro 10 Corporate Edition, click the
Scan
button located
on the left side.
3. In the TWAIN window that opens, select
ADF
(Front Side)
as the Scan Type if
you want to scan single-sided documents, or
select
ADF (Duplex)
to scan
double-sided documents.
4. Adjust the scanning settings. For
ADF (Duplex)
scan, you can tailor settings
individually for front and rear sides of the documents. Click
Front Side
button
to adjust the scanning settings of document front side and then click
Rear
Side
button to adjust the scanning settings of document rear side.
You can enable the function of
Merge Pages
only when you select
ADF
(Duplex)
as
Scan type
and
Automatic Size
as
Page Size
to output the scan
images of both front and rear sides in one image. After the function of
Merge
Pages
is enabled, you can make the selection of
Horizontally
to generate both
front and rear image data horizontally in a joined image (the rear image will be
placed at the right side next to the front image), or
make the selection of
Vertically
to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
24
