Plusmed pM-N04, Instruction Manual

Page: 28 / 76

28
Problem Cause Remedy
Nothing happens
when the power
switch is pressed. Is the AC adapter connected
correctly to the an electrical outlet
and the compressor? Check that the plug is inserted in an electrical
outlet. Unplug then reinsert the plug if
necessary.
No nebulisation or
low
nebulisation
rate,when the
power is on.
Is there medication in the medication
tank?
Add the correct amount of medication to the
medication tank.
Is there too much/little medication in
the medication tank?
Is the vaporiser head missing and
not assembled correctly?
Attach the vaporiser head correctly.
Is the nebulizer kit assembled
correctly?
Assemble the nebulizer kit correctly.
Is the nozzle blocked? Make sure that the nozzle is free of blockages.
Is the nebulizer kit tilted at a sharp
angle? Make sure that the nebuliser kit is not tilted at
an angle of more than 45 degrees.
Is the air tube connected correctly?
Make sure that the air tube is correctly
connected to the compressor and nebuliser kit.
Is the air tube folded or damaged?
Make sure that the air tube does not contain
kinks.
Is the air tube blocked? Make sure that the air tube is free of blockages.
Is the air filter dirty? Replace the air filterwith a new one.
The device is
abnormally loud. Is the air filter cover attached
correctly?
Attach the air filter cover correctly.
The device is very
hot.
Is the compressor covered?
Do not cover the compressor with any type of
cover during use.
Is the device operating continuously
over 20 minutes?
Limit use to 20 minutes at a time, and allow
a 40 minutes interval before using the device
again.
Note: If the suggested remedy does not solve the problem, do not try to repair the device- no parts of
the unit are user serviceable.
Return the unit to an authorized retail outlet or distributor.