PLUSLITE VERO profile 700, User Manual

Page: 5 / 6

Note:
1.Above all projects to the actual lighting shall prevail, no notice if there is further
modification;
2.The programming function provides only a very limited operation, in the case of
no control units to use. Generally do not recommend
the use of manual programming;
3.In the absence of the DMX512 signal, only need to set up first items, namely the
address code can be used lamps.
5.DMX 512 Control connection
Connect the provice XLR cable to the female 3 pin XLR Output of your control and
the other side to the male 3-pin XLR input of the moving head,You can chain multiple
Movng head together through serial linking.The cable needed should be two core,
screened canle with XLR input and output connectors.Please refre to the diagram
below.DMX-512 Connection with DMX terminator.
For installations where the DMX cable has to run a long distance or is in an electri-
cally noisy enviromentsuch as in a disco,it is recommended to use a DMX terminator.
This helps in preventing corruption of the digital control singal by electrical noisy.
The DMX terminator is simply an XLR plug with a 120 resistor connected between
pins 2and 3,which is then plugged into the output XLR Socket of the last fixture in
the chain. Please see illustrations
120
PIN3
PIN2
8
.
38
Control Channel s
1 Pan 0~255
2 Pan fine 0~255
3 Tilt 0~255
4 Tilt fine 0~255
5 Colour wheel 0~63 6 colours
64~221 Colour Arbitrary positioning
222~239 Rotate left
240~255 Rotate right
6 Cyan 0~255
7 Magenta 0~255
8 Yellow 0~255
9 Colour temperature 0~255
10 Fixed gobo 0~71 8 gobos
72~143 Gobo Arbitrary positioning
144~199 Rotate left
200~255 Rotate right
11 Rotating gobo 0~63 7 gobos
64~135 Gobo Arbitrary positioning
136~195 Rotate left
196~255 Rotate right
12 Gobo rotation 0~3 No effect
4~123 Rotating gobo angle
124~187 Rotate left
188~191 Stop
192~255 Rotate right
13 Dimmer 0~255
14 Dimmer fine 0~255
5
www.piu39av.com