Plus N-204, User Manual

Page: 6 / 54

E-6
LAN terminal (RJ-45)
Connect to a LAN port on the network (switching
hub, etc.) using a commercially available LAN cable.
USB memory port (type A)
Insert a commercially available USB
memory device here. Scanned images
can be saved. (See page E-19)
DC input connector
Connect this with the DC plug end of the AC power
adapter. (See Page E-53.) (Only connect the supplied
AC power adapter; nothing else.)
Printer connector (USB port Type A)
Connect this with the USB connector of the printer
(See Page E-53).
(The printer connector is dedicated for use with a
printer; use it only with a printer.)
* This illustration does not show the printer or
connection cords.
Personal computer (PC) dedicated USB
port (Type B)
Connect this with the USB port (type A) of the PC.
Used to connect the copyboard to a computer to
make the copyboard’s device settings. Can also be
used to copy scanned images onto the computer.
(See page E-23, E-35.)
The connector is located on the bottom sur-
face of the main unit.
The diagram view is seen from the bottom.
Names of the Parts
Unlock
Lock
Caster
Locking/unlocking the stand’s casters
After installation, lock the casters with the stoppers. When
moving the stand, unlock the caster’s stoppers.
The stoppers are locked when the bottom is pressed. Press
the top to unlock them.
Input/output terminals