3
Opening button ............................. Press this button to open the printer hatch when replacing
the thermal paper.
Power switch ................................. Press "I" to turn ON the power when starting machine
operation.
Power lamp .................................... Press the switch, and the green lamp will blink on and off.
The lamp will stay lit (green) when the read sensor inside
the machine is ready for operation.
Paper warning lamp ....................... When the thermal paper has run out, the red lamp will
light. Load new recording paper.
One-surface copy key .................... This is used when one page of the screen is copied onto
A4 paper. The machine produces a copy at a reduced
scale of the same length and breadth.
Two-surface reduction copy key .. This is used when copying two pages of the screen at a
reduced size onto A4 paper. At this time, the copy is
reduced horizontally.
Repeat key ...................................... For use with optional PC interface kit.
PC COPY key .................................. For use with optional PC interface kit.
Feed/stop key ................................. This is used when the screen slides to the left.
Pressing this key advances the screen by one page and
then automatically stops.
Pressing the key while the board screen is being moved
stops it immediately. This can also be used when paper
has run out and must be refilled.
If this key is pressed during the copying operation, the
copying performance ends and the printer stops.
OPERATION PANEL
CONTROL FUNCTIONS
