background image

First of all, we would like to thank you very much
for purchasing a Plus Board Fax CONFERENCE
MODEL.

Please read this Operation Manual before using
the machine to get the best performance out of
the product.

We recommend that you keep this manual for
future reference.

FEATURES ......................................................... 1

PRODUCT FEATURES ...................................... 2

CONTROL FUNCTIONS ..................................... 3

HOW TO USE ..................................................... 4

MAINTENANCE/HOW TO STORE ..................... 7

HANDLING PRECAUTIONS ............................... 7

CHECK LIST OF SIMPLE FAILURES ................ 8

SPECIFICATIONS .............................................. 9

CONTENTS

EXPLANATION OF UL REGULATORY LABEL

(USA ONLY)

PLEASE NOTE: 

The description "Computer Rooms" on the

label located on the rear of the copyboard, refers to areas where
an abundance of computer control equipment (such as high output
servers) is being used, It does NOT refer to environments such
as offices or classrooms where there are simply PC's being used.

UL regulations require that we place a warning label in regard to
this item being used in a "Computer Room". Please understand
that this equipment will in no way interfere with the running of
computer equipment or peripherals. The UL regulation simply
applies to all items that contain flammable material in excess of a
specified area, We would like to  further stress that there is no
inherent risk of this equipment causing a fire. It is only pointing
out that should a fire occur, then this equipment will also burn
along with any other flammable materials contained in the room.

Should you have any questions whatsoever about this information,
please call PLUS Corporation of America directly at (201)818-
2700

Summary of Contents for BF-030 S Operation













Reviews: