SFP-H / SFP-H-7 SERIES
with PIPM-R-7
User’s Manual
9 of 26
address.
2. Connect the controlling computer’s Ethernet port that is being used to control the unit into an
Ethernet switch. This requires disconnecting the Ethernet cable from the Control LAN port of
the unit.
3. Connect the Media LAN port of the unit into the Ethernet switch.
4. Connect the source of the Media IP stream into the Ethernet switch.
5. Set the controlling computer’s Ethernet port that is being used to control the PIPM-R-7 to
DHCP.
6. From the controlling computer, point a web browser to the IP address noted in step 1. The
PIPM-R-7’s web user interface displays in the browser.
3)
Web Browser via Ethernet
General Screen Information
PIPM-R-7 web pages have certain areas and control in common. Vertical and horizontal scroll
bars appear when information extends past the border of a panel.
The Round blue Up/Down arrow button on each panel and many status parameters opens and
closes that panel or set of parameters.
Menu Panel
On the left of each screen is a Menu panel listing all the available screens. Click any of these
links to jump to that screen.
Alarms Panel
Alarms are displayed in a panel on the left side of each screen. Clicking on the arrow opens or
closes this panel to show or hide the alarms. Hovering the mouse over an alarm (red) or warning
(yellow) may provide additional detail about the condition.
Connections Panel
On the right side of every screen is a Connection panel listing information for the connected
PIPM-R-7 module.
Network Panel
On the right is a Network panel that lists other PIPM-R-7 modules on the network.
Parameters and Information
The reset of the screen displays all the parameter selections and information available for the
selected PIPM-R-7 module screen.
