C
Step C
Place the support arm set
S1HW35
on the glass ensuring the rail is horizontal.
You may need to cut the rail in suitable length. Mark the position of the glass
clamp (
S1HW35-2
) and the wall fixing (
S1HW35-4
). Remove the rail, tighten
the glass clamp using the screw driver. Remove the wall fixing and drill with
6mm masonry drill bit and insert the wall plugs (
SBLTL001)
. Then fix the wall
fixing using the screws (
SBLTL013
)
to wall.
Place the rail with two rail sleeves (
S1HW35-3
) as
C.5
shown, adjust the rail in suitable position then tighten
the grub screws using the M5 Allen Hex Key (
SBLTL019
)
.
C.1
C.2
C.3
C.4
C.5
C.6
