Wet Room
ASSEMBLY GUIDE
Please note hand tools
NOT
supplied.
PH2 TYPE
Screwdriver
7mm
Masonry Drill
3.2mm
HSS Drill
Drill
Tape Measure
Sealant Gun
Spirit Level
Pencil
1..
The cubicle can be constructed either way up, for left or right hand opening.
2..
These instruction and list of parts assume that installation is done against solid or tiled walls. Hollow or
“Stud - partition” walls will require alternatie fixings. Please consult a hardware supplier for the correct type.
It may also be necessary to consult your tiling supplier about the correct method for drilling your tiles.
3..
Please check this product for damage prior to starting the installation. No claims can be made after the
products has been fitted, or after fitting has commenced.
4..
This is a 2 person installation.
5..
Please note the minimum and maximum adjustment for this product are based on perfectly plumb walls.
EXPOLDED VIEW AND PARTS LIST
1
3
4
5
6
7
2
11
12
10
16
13
14
15
8/9
SN
Code
Descrip
ti
on
Qty Image
SN
Code
Descrip
ti
on
Qty Image
1 N/M
Glass Panel
1
9 S1PS04-R Wall Channel Cap RH
1
2 ALU8654 Wall channel
1
10 S1PS05
Upright Pro
fi
le Cap
1
3 S1HW35-1 1000mm Square Rail
1
11 S1PS07
Screw Cover Cup
4
4 S1HW35-2 Glass Clamp
1
12 S1PS08
Screw Cover Cap
4
5 S1HW35-3 Rail Sleeve
2
13 SBLTL001 Wall Plug Ø6
5
6 S1HW35-4 Wall Fixing
1
14 SBLTL003 Tapping Screw ST3.5x12 4
7 S1HW35-5 Rail Joining With Gasket
1
15 SBLTL013 Tapping Screw ST4x30
5
8 S1PS04-L Wall Channel Cap LH
1
16 SBLTL019 M5 Allen Hex Key
1
Part List
