Plum Z306, User Manual, Page: 7 / 20

Get Started
! Important: This device is designed to be used with a SIM card, use of
incompatible SIM cards may result in the device not working and could
cause damage to the device or SIM card. Make sure the phone is properly
switched off when removing battery and inserting the SIM
2.2 Battery
2.2.1 Remove and install of the Battery.

When removing the battery follow the following steps:
①
Firmly lift the battery cover from bottom left corner of the phone while the
phone is faced down;
②
Gently push the battery forward and lift it up.

When installing the battery follow the following steps:
①
Make the battery metal contact completely with the phone in the battery
compartment, and then push the battery as shown in the picture below.
②
Put the battery cover on.
Warning: Do not connect any external electric power directly to the battery,
this may result battery explosion and cause injury
2.2.2 Battery charging

Plug the charger connector with the phone, and plug the charger into the
electrical outlet.

At this time the charge level icon will repeatedly flash at the top right corner of
the mobile phone’s screen; showing that battery is charging When charging is
complete, unplug the charge connector from the electrical outlet and the mobile
phone.
ATTENTION:
7