8 |
P a g e
User Manual
Mounting and Setting
It is very important to respect the hole patterns and the fore-
and-aft alignment of the toe and heel piece. Consequently, it
is highly recommended to have the bindings mounted by a
specialized dealer equipped with a drilling jig.
Regarding the drilling parameters, it is highly recommended
to follow the ski manufacturer’s instructions in order to obtain
the minimum level of retention in the ski.
The release setting must be done according your own
experience and your personal specificities (age, type of skier,
weight, etc.)
The setting done by a specialized dealer IS ONLY ACCURATE
WHEN DONE WITH THE EXACT SAME BOOT AS THE ONE
USED FOR ADJUSMTENT and usage cannot be directly
transferred to a different boot. If the boots are replaced, the
release setting should be recalibrated.
The fastening of the heel adjustment screws (6) must be
checked before the first use, and then a couple of times a
year.
WARNING:
These bindings do not meet the requirements
of the ISO 8364 standard.
Check with the ski manufacturer the mounting
compatibility related to the holes pattern.
WARNING:
Check the toe piece (5) screws locking such as
the heel adjustment screws after the first
mounting and a couple of times a year.
