Plum MED-TAB v.2, Instructions For Use Manual

Page: 17 / 19

MED-TAB v.2 Instructions for Use PUB INT EN – 002TR
17
iQ-
VIE
W
2.6.
0
Gru
ndl
ege
nde
Anf
ord
eru
nge
n
CO
NF
DE
-
001
D1
7
17
7. i
Q
-
▫
Do not place the unit in a hot environment leading to too high operating
temperatures. (H-No.: HW1.3.1)
▫
Do not place the unit in a location where steam flows directly to the device.
▫
Do not place the unit near heat generating devices or a humidifier. (H-N.:
HW1.3.1)
▫
Do not place the unit in an inflammable gas environment. (H-No.: HW2.2.7)

To avoid danger of suffocation, keep the plastic packing bags away from newborns and
children.

To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may
damage and result in fire, electric shock or burn.

Use the correct voltage.
▫
The unit is designed for use with a specific voltage only. Connection to another
voltage than specified in this User Manual may cause fire, electric shock, burn or
equipment damage.
▫
Do not overload your power circuit, as this may result in fire, electric shock or
burn.

Handle the power cord with care. If the power cord is broken, stop using it immediately.
Using a broken power cord may result in fire, electric shock or burn.
▫
Do not put the power cord under the unit or heavy objects.
▫
Do not pull up or twist the power cord.

Never touch the plug and power cord if it begins to thunder. Touching them may result
in electric shock or burn.

Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may
leak from the panel is poisonous. Prevent to get it into the eyes or mouth. If any part of
the skin or body comes in direct contact with the panel, please wash thoroughly. If some
physical symptoms result, please consult your doctor.

Follow local regulations or laws for safe disposal.

Handle with care when carrying the unit. Disconnect the power cord and data cables and
remove the optional unit. Moving the unit with the cord or the option attached is
dangerous. It may result in injury. (H-No.: HW1.4.1)

Do not block the ventilation slots of the cabinet.
▫
Do not place any objects on the ventilation slots.
▫
Do not install the unit in a closed space.
▫
Do not use the unit laid down or upside down.
▫
Blocking the ventilation slots prevents proper airflow and may result in fire,
electric shock, burn or equipment damage. (H-No.: HW1.3.2, HW4.3.1)

Do not touch the plug with wet hands. Doing so may result in electric shock.