Pressure recorder MacR6-P
Installation manual v1.0
– December 2017
4
6. CONFIGURATION PARAMETERS
•
Main application window presents parameters necessary for proper device operation.
Additional parameters:
o
PIN code to SIM card
o
Device password (by default: 4096)
o
Localization parameters
NOTE: Application is designed for whole MacR6 product family. Types of presented pa-
rameters can be different for each product type.
•
Choosing "MORE PARAMETERS" presents options common for bigger amount of measuring sites.
Values able to adjust:
o
diagnostic phone number (i.e. installers cell phone number which will get the SMS
message with installation summary). Way of typing: XXYYYYYYYYYYY where XX -
country destination number w, YYYYYYYYYYY - phone number
o
data server address - way of typing: address:port, i.e. www.ewebtel.com:80
o
time synchronization option (winter/summer/auto change)
•
Choosing "OPTIONS" presents additional parameters:
o
Info - device nameplate, information about last measured GSM range signal value -
CSQ, device clock
o
Clock programming - synchronizing devices clock with the smartphone including time
synchronization options (winter/summer/auto change)
o
Pressure limits - MacR6-P allows for setting four pressure limits - low limit warning and
exceedance, high limit warning and exceedance. After exceeding the warning level user
will get the information about exceedance risk.
o
Service APN - APN used for communication with FTP server.
NOTE: It is essential to ensure if the recorder clock is set correctly. If not, it is required
to set it using menu OPTIONS and Clock programming.
